PC/ABS Natural
Code: 3296/1Related products
Product detailed description
Fillamentum PC / ABS Natural
PC/ABS is a polycarbonate and acrylonitrile butadiene styrene blend with excellent properties that make this high-tech material ideal for application in the automotive industry.
It is also resistant to high temperatures and can be used as a part of consumer or office electronics. It's perfect for printing parts of printers, copiers, game consoles, or keyboards. It's a filament that is light but strong at the same time and shows minimal signs of wear even after long-term use.
Features:
- Durable
- Good interlayer adhesion
- Smooth finish
- Creep resistance (resistance against deformation under long-term load)
- Chemical resistance against alcohols, oils, greases, ozone, and water
- Excellent temperature resistance up to 115 °C
- Impact resistance also at low temperatures
- Higher flexural strength than ABS, ASA, and HIPS
- Recyclable, non-toxic
- Safe to use in electrical and electronic equipment
| Working temperature: | 260–280 °C |
| Heated bed: | 90–105 °C |
| Diameter: | 1.75 mm |
| Diameter tolerance: | +/- 0.05 mm |
| Weight: |
600 g of filament (+ 230 g spool)
|
| The length of the filament: |
230 m (1.75 mm, 600 g)
|
| RAL | Pantone | HEX: |
|
Comparison of our styrenic polymers:
| PC/ABS | ASA Extrafill | ABS Extrafill | HIPS Extrafill | |
| Weather resistance | yellowing | UV stability | yellowing | yellowing |
| Tensile strength | 42 MPa | 40 MPa | 32 MPa | 26 MPa |
| Elongation at break | 7 % | 35 % | 20 % | 40 % |
| Hardness | ★★★★ | ★★ | ★★★ | ★★ |
| Impact resistance (notched) | ★★★ | ★★★ | ★★ | ★★ |
| Heat resistance (Vicat) |
113 °C | 94 °C | 96 °C | 88.5 °C |
The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.
Additional parameters
| Category: | PC/ABS |
|---|---|
| Warranty: | 2 years |
| Material: | ABS, PC, PC/ABS |
| Color: | natural |
| Průměr struny: | 1.75 mm |
| Hmotnost návinu: | 0.6 kg |
| Materiál: | PC/ABS |
| Odstín RAL: | N/A |
| Odstín PANTONE: | N/A |
| Doporučená teplota extruze: | 260 - 280°C |
| Doporučená teplota podložky: | 90 - 105°C |
| Tolerance: | max. ± 0.05 mm |
| Výrobce: | Fillamentum |
| Země původu: | Česká republika |
| Délka návinu: | (1.75 mm 600g) 230 m |
Be the first who will post an article to this item!
Only registered users may post articles. Please log in or register.
Be the first who will post an article to this item!