HIPS Extrafill Natural

Code: 2190/1 2190/2 Choose variant

Not rated

3D tisková struna HIPS Extrafill Natural

€26,29 €21,73 excl. VAT

Choose variant

Delivery to: 05/12/2024 20/12/2024 Choose variant
net weight
Diameter_
Chosen variant is not available. Reset selected parameters.

HIPS

High-performance material not only suitable for supports but also great for functional objects.

Detailed information

Product detailed description

Fillamentum HIPS Extrafill Natural

HIPS Extrafill is a multifunctional material. Thanks to its structure it's widely used for printing of support parts, dissolvable in Lemonesol. Ideal for quick printing of complex objects with overhangs using dual extrusion 3D printers.

Besides that, the high-impact polystyrene (HIPS) filament is great for printing functional components. It is characterized by good thermal resistance, low water, and moisture absorption, electrical insulation, and impact strength.

Features:

Good water resistance even at higher temperatures
High impact resistance
Exceptional dielectric strength (it can withstand electrical breakdown)
Temperature resistance up to 95 °C
High interlayer adhesion
Matte surface
Chemical resistance against water, acids, alkalis, ozone, alcohols, oils, and greases
Post-processing by painting & sanding
Smoothing by Lemonesol vapors
Lower odor than ABS and ASA
Recyclable
Low density
BPA-free
Safe to use in electrical and electronic equipment
Safe for food contact applications

When used for printing of support parts:

ideal adhesion to other materials
smooth interface
fast removal
widely used in combination with ABS and ASA filaments
dissolvable in Lemonesol without influence on the printed object

Working temperature:	230–250 °C
Heated bed:	90–105 °C
Diameter:	1.75 mm and 2.85 mm
Diameter tolerance:	+/- 0.05 mm
Weight:	750 g of filament (+ 230 g spool)
The length of the filament:	328 m (1.75 mm, 750 g) 120 m (2.85 mm, 750 g)
RAL \| Pantone \| HEX:	N/A \| N/A \| N/A

	HIPS Extrafill	Nylon FX256
Tensile modulus	2000 MPa	1400 MPa
Dielectric strength	155 kV/mm	27 kV/mm
Notched impact resistance	17 kJ/m²	7 kJ/ m²
Heat resistance (HDT)	85 °C (1.8 MPa)	50 °C (1.8 MPa)

The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

food rohs

Additional parameters

Category:	Support filaments
Warranty:	2 years
Material:	HIPS
Color:	natural
Průměr struny:	1.75 mm, 2.85 mm
Hmotnost návinu:	0.75 kg
Materiál:	HIPS
Odstín RAL:	N/A
Odstín PANTONE:	-
Doporučená teplota extruze:	230 - 250°C
Doporučená teplota podložky:	90 - 105°C
Tolerance:	max. ± 0.05 mm
Výrobce:	Fillamentum
Země původu:	Česká republika