FIBREX™ PP+GF30 polypropylen 1.75mm 500g
Code: 982Related products
Product detailed description
FibreX™ PP+GF30 [Polypropylene] 3D Printing Filament
FibreX™ PP+GF30 is made using a specialty formulated 30% glass fiber reinforced polypropylene copolymer which we created specifically for 3D printing. Our formulation offers improved thermal properties and lower shrinkage & warp compared to competitive PP-based compounds.
Reinforcing this trusted engineering polymer with glass fiber really made it a game changer for industrial applications. 3D printed PP+GF30 parts can be found in a wide array of real-world functional end uses or prototypes with automotive, tooling fixtures and jigs, appliances, and sporting goods.
Benefits of PP+GF Include:
- Excellent resistance against a huge variety of chemicals
- Low density and weight
- Low shrinkage and warping
- Does not absorb moisture, no drying needed!
- High strength, stiffness, and impact resistance
Chemical Resistance of PP+GF
Since properties can change depending on print environment and 3D model geometry and/or surface area, it is always required to do your own testing, but Polypropylene is famous for its chemical resistances to a huge range of environments including:
- Acids: Acetic, Boric, Hydrochloric, Phosphoric, Stearic, Sulfuric, Uric
- Bases: Hydrocides of Ammonium, Barium, Calcium, Magnesium, Potassium, Sodium
- Solvents: Acetone, Ethanol, MEK, Phenol (10%), Water
Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
Recommended Print Settings:
- Extruder: 240-270°C
- Bed Temp: 80-110°C
- Nozzle: We highly recommend a hardened steel nozzle with a minimum diameter of 0.4mm for abrasive materials such as this
- Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with abrasive filaments
- Bed Prep: Magigoo Bed Prep gives us the best results
- Heated Chamber: Not required
- Supports: AquaTek™ Water Soluble X1 USM Universal Support Material is one of the few materials capable of properly forming a strong, temporary bond for support. Polypropylene is infamous for being difficult to support, and X1 USM is ideal for the job
- Drying Instructions: Not needed
Additional parameters
Category: | Glass Fiber |
---|---|
Warranty: | 24 Měsíc(ů) |
Weight: | 0.95 kg |
Diameter: | 1.75 mm |
Material: | GF, PP |
Color: | black |
Net weight: | 0.5 kg |
Výrobce: | 3DXTech |
Průměr struny: | 1,75 mm |
Materiál: | PP GF30 |
Barva: | černá |
Hmotnost návinu: | 0,5 kg |
Země původu: | USA |
Doporučená teplota extruze: | 240-270°C |
Doporučená teplota podložky: | 80-110°C |
Be the first who will post an article to this item!
Only registered users may submit ratings. Please log in or sign up.
Be the first who will post an article to this item!