Zákaznická podpora:info@svet-3d-tisku.cz

3DXSTAT™ ESD FLEX (TPU) Tisková struna 1,75mm 0.75kg

Kód: 987
Novinka Tip
Značka: 3DXTECH
3 092 Kč 2 555 Kč bez DPH 4 123 Kč / 1 kg
Ihned k odeslání
Můžeme doručit do:
8.12.2021

Elastomer 3DXSTAT™ ESD-Flex TPU 95A [Termoplastický polyuretan] je termoplast technické kvality, upřednostňovaný pro své vyrovnané vlastnosti, tedy mezi vynikající flexibilitou, ESD bezpečností, snadným tiskem, chemickou odolností a houževnatostí.

Detailní informace

Detailní popis produktu

3DXSTAT™ ESD-Flex TPU 3D Printing Filament [95A]

3DXSTAT™ ESD-Flex TPU [thermoplastic polyurethane] elastomer is an engineering-grade thermoplastic chosen for its balance of excellent flexibility, ease of printing, chemical resistance, and toughness. 3DXSTAT™ ESD Flex elastomeric filament has been formulated to offer ESD-Safe electrical conductivity with a target surface resistance of 10^7 to 10^9 Ohm.

Benefits of Flexible TPU Include:

  • High elongation, over 300%
  • Shore 95A semi-flex hardness
  • Ease of printing compared to similar flexible materials
  • Excellent layer bonding
  • Outstanding fatigue resistance
  • Very low odor while printing
  • Low moisture absorption
  • Retains flexibility even at low temperatures
  • Styrene and BPA free

Benefits of 3DXSTAT™ Include

  • Consistent surface resistivity
  • Improved retention of impact & elongation
  • Low particulate contamination
  • Minimal contribution to outgassing and ionic contamination

 

Typical ESD Flex Applications Include:

  • Semi-con: HDD Components, Wafer Handling, Jigs, Casings, & Connectors
  • Industrial: Conveying, Metering, and Sensing Applications

Target Conductivity for 3DXSTAT ESD Flex:

  • 10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.
  • Note: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently, not to mention varied part geometry. Therefore, expect some trial time to understand how ESD Flex filament works in your specific printer and application.

Surface Conductivity as a Function of Extruder Temperature:

The surface resistance of the printed ESD Flex part will vary depending on the printer’s extruder temperature. For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity. Therefore, the surface resistance can be ‘dialed-in’ by adjusting the extruder temperature up or down depending on the reading you receive on your part.

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended ESD Flex Print Settings:

  • Extruder: 220-240°C
  • Bed Temp: 40-60°C
  • Bed Prep: Hairspray on top of a layer of Magigoo Bed Prep gives us the best results.
  • Heated Chamber: Not required
  • Supports: AquaTek™ water soluble X1 USM Universal Support Material works ideal for complex parts
  • Drying Instructions: 65°C for 4 hours.
 
 

 

Doplňkové parametry

Kategorie: Antistatické a vodivé
Záruka: 24 Měsíc(ů)
Hmotnost: 1.1 kg
Průměr struny: 1.75 mm
Materiál: ESD, PETG, TPU
Barva: černá
Hmotnost návinu: 0.75 kg
Výrobce: 3DXTech
Průměr struny: 1,75 mm
Materiál: ESD TPU
Barva: černá
Hmotnost návinu: 0.75 kg
Země původu: USA
Doporučená teplota extruze: 230 - 260°C
Doporučená teplota podložky: 60-90°C
Tvrdost: Shore 95A
High elongation: over 300%
Target conductivity: 10^7 to 10^9 ohm surface resistivity

Buďte první, kdo napíše příspěvek k této položce.

Přidat komentář
Nevyplňujte toto pole:

Buďte první, kdo napíše příspěvek k této položce.

Pouze registrovaní uživatelé mohou vkládat články. Prosím přihlaste se nebo registrujte.