LW-PLA GRAY SILVER1,75mm 750g
Code: 7148Related products
Product detailed description
COLORFABB LW-PLA
Pros
Reduce the weight of printed parts up to 65% compared to regular PLA.
Control extruded volume of material by regulating printing temperature. At around 230C LW-PLA starts foaming and can increase its volume by nearly 3 times.
With one spool LW-PLA you can print as much as with 3 regular spools of PLA, due to the 3x lower material multiplier / flow.
Easy to cut, trim, sand and takes paint really well.
LW-PLA (Natural,Black,Gray Silver & Red) hides layer lines really well.
Cons
Material oozes on travelmoves, this is normal and can’t be reduced completely.
Color will turn lighter when material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer color.
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
| Adviced 3D printing temperature 195-260C |
| Adviced 3d print speed 40 - 100 mm/s |
| Advised Heated bed (if you have one, not strictly necessary): 50-60C |
| Cooling fan - |
Additional parameters
| Category: | PLA |
|---|---|
| Warranty: | 2 years |
| Weight: | 1.2 kg |
| Diameter: | 1.75 mm |
| Material: | LW-PLA |
| Color: | grey |
| Net weight: | 0.75 kg |
| Výrobce: | colorFabb |
| Průměr struny: | 1.75 mm |
| Materiál: | LW-PLA |
| Barva: | gray silver |
| Hmotnost návinu: | 750 g |
| Pantone color: | |
| Doporučená teplota extruze: | 195 - 250 °C |
| Tolerance: | max. ± 0.05 mm |
| Délka struny: | ~ 260 m |
| Země původu: | EU |
| Teplota podložky: | 60°C |
| Hustota filamentu běžná: | 1.210-1.430 g·cm-3 (non activated density) |
| Hustota napěněná: | 0.403 – 0,476 g·cm-3 (maximum activated density) |
| Teplota skelného přechodu: | 55°C |
Be the first who will post an article to this item!
Only registered users may submit ratings. Please log in or sign up.
Be the first who will post an article to this item!