Nylon AF80 Aramid

Code: 3272/1 3272/2 Choose variant

Not rated

Brand: Fillamentum

€83,25 €68,80 excl. VAT

Choose variant

Delivery to: 09/12/2024 09/12/2024 Choose variant
net weight
Diameter_
Chosen variant is not available. Reset selected parameters.

Nylon

The nylon filaments provide great chemical and wear resistance. The objects are printed with high interlayer adhesion. The functionality of objects is good under a wide range of temperatures.

Detailed information

Product detailed description

Fillamentum Nylon AF80 Aramid

This filament is made of polyamide 12 reinforced with 8 % of aramid fibers. Its benefits are tribological properties, great chemical resistance, high stability under a wide range of temperatures, and great processing.

All of these make it suitable for the fabrication of products like an unwinding wheel, bearings, or cogwheels. It's a durable material that resists a wide range of chemicals, including car fluids.

Features:

Good interlayer adhesion
Mechanical properties retained in range -40 °C up to +140 °C
Tribological properties
Smooth surface
Good hardness
Wear resistance
Creep resistance (resistance against deformation under long-term load)
Stiffness & strength
Heat resistance even under high loads
Low thermal expansion
Chemical resistance against a wide range of substances
Low density
Safe to use in electrical and electronic equipment
Low fumes released, BPA-free, styrene-free

Working temperature:	235–260 °C
Heated bed:	80–110 °C
Diameter:	1.75 mm and 2.85 mm
Diameter tolerance:	+/- 0.10 mm
Weight:	600 g of filament (+ 230 g spool)
The length of the filament:	243 m (1.75 mm, 600 g) 94 m (2.85 mm, 600 g)
RAL \| Pantone \| HEX:	N/A \| N/A \| N/A

Comparison of our Nylon family:

	Nylon AF80 Aramid	Nylon CF15 Carbon	Nylon FX256
Tensile strength	50.4 MPa	54.5 MPa	45 MPa
Elongation at break	5.8 %	103 %	50 %
Impact resistance	53.2 kJ/m² (unnotched) ★	86.2 kJ/m² (unnotched) ★	7 kJ/m² (notched) ★★★
Ease of printing	★★★	★★	★
Wear resistance	★★★	★★★	★★
Creep resistance	★★★	★★★	★
Heat resistance	from -40 °C up to 140 °C	from -40 °C up to 140 °C	from -40 °C up to 140 °C
Heat resistance at high load	★★★★	★★★	★

The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

rohs

Additional parameters

Category:	NYLON
Warranty:	2 years
Material:	Aramid, NYLON
Color:	natural
Průměr struny:	1.75 mm
Hmotnost návinu:	0.6kg
Materiál:	Polyamide 12
Odstín RAL:	N/A
Odstín PANTONE:	N/A
Doporučená teplota extruze:	235 - 260°C
Doporučená teplota podložky:	80 - 105°C
Tolerance:	max. ± 0.10 mm
Výrobce:	Fillamentum
Země původu:	Česká republika