STEELFILL 1,75 mm 750 g
Code: 7085Related products
Product detailed description
STEELFILL
“Steel yourself!” With steelFill you can give your print a very cool and shiny metal look. With post-processing like sanding and polishing you can make it look truly special, like a part forged in a metal workshop. steelFill has slight magnetic properties.
Please note: The high steel content of the steelFill material makes this filament quite abrasive to brass nozzles. Therefore it’s recommended to print with abrasive resistant nozzles, for instance the E3D hardened steel nozzle, the JET RSS50 and performance 3-d Hercules nozzles.
- Steel
- Heavy
- Slightly Magnetic
| Material: colorFabb - PLA/PHA + fine steel powder |
| Diameter Tolerance: ± 0.05 mm |
| Density: 3,13g/cm3 |
|
Glass Transition Temperature: |
| Adviced 3D printing temperature 190-210C* |
| Adviced 3d print speed 40 - 80 mm/s |
|
Advised Heated bed |
| Cooling fan - |
TIP! Steel nozzles
The high steel content of the steelFill material makes this filament quite abrasive to brass nozzles. It’s not as bad as the carbon fiber, XT-CF20 materials, but can effect the print quality after printing 1.5 kg. Therefore it’s recommended to print with abrasive resistant nozzles, for instance the E3D hardened steel nozzle, the JET RSS50 and performance 3-d Hercules nozzles.
Additional parameters
| Category: | METAL |
|---|---|
| Warranty: | 24 Měsíc(ů) |
| Weight: | 1 kg |
| Diameter: | 1.75 mm |
| Material: | METAL |
| Color: | silver |
| Net weight: | 0.75 kg |
| Výrobce: | ColorFabb |
| Průměr struny: | 1,75 mm |
| Materiál: | STEEL |
| Barva: | stříbrná |
| Délka struny: | 80 m |
| Hmotnost návinu: | 0,75 kg |
| Advised processing temperature: | 190 - 210 °C |
| Tolerance: | max. ± 0.05 mm |
| Density: | 3.13 g/m3 |
| Origin: | EU |
| The item has been sold out… | |
Be the first who will post an article to this item!
Only registered users may post articles. Please log in or register.
Be the first who will post an article to this item!