XT Clear 2,85 mm / 10m
Code: 4044Related products
Product detailed description
XT Clear
colorFabb_XT is a functional, engineering grade 3D printing filament based on Eastman Chemical Amphora 3D Polymer. Clear as ice, colorFabb_XT without any colorant. Just as it should be. Simple and beautiful
- FDA food contact compliance
- Low Odor
- High Toughness
| Material: colorFabb_XT CO-POLYESTER |
| Diameter Tolerance: ± 0.05 mm |
| Density: 1.27 g/cm3 |
| Continuous service temperature: 75C |
| Adviced 3D printing temperature 240-260C |
| Adviced 3d print speed 40 - 70 mm/s |
| Advised Heated bed 60-70C |
| Build platform For colorFabb_XT we advice to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part. |
Additional parameters
| Category: | Copolyester filaments |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.082 kg |
| Diameter: | 2.85 mm |
| Material: | kopolyester |
| Color: | transparent |
| Net weight: | metráž (10m x počet kusů v košíku) |
| Výrobce: | colorFabb |
| Průměr struny: | 2.85 mm |
| Materiál: | Ko-polyester |
| Barva: | čirá |
| Doporučená teplota extruze: | 240 – 260 °C |
| Tolerance: | max. ± 0.05 mm |
| Hmotnost návinu: | ~ 82 g |
| Délka struny: | 10 m |
| Země původu: | EU |
| The item has been sold out… | |
Be the first who will post an article to this item!
Only registered users may post articles. Please log in or register.
Be the first who will post an article to this item!
Add a comment